Synthesis of high<i>J</i><sub>c</sub>MgB<sub>2</sub>bulks with high reproducibility by a modified powder-in-tube method

DOI 18 Citations

Search this article

Description

Systematic research on the improvement in Jc of MgB2 bulks by the optimization of sintering conditions was performed by applying a highly reproducible fabrication method. Compared with conventional methods, the fabrication method in the present study (powder-in-closed-tube, PICT) has quite a simple procedure: packing powders into the stainless tubes, pressing and sintering. The major merit of the fabrication method is complete suppression of Mg evaporation by uniaxial pressing of both ends of the metal tubes. Furthermore, resulting samples have the tape shape which is regarded as the short conductor with mono-core. Therefore, their critical current properties can be evaluated by the transport method as well as magnetic measurements. The undoped MgB2 bulk synthesized with optimized sintering conditions, at 850 °C for 3 h, recorded a high Jc of 3.9 × 105 A cm−2 at 20 K under self-field.

Journal

Citations (18)*help

See more

Details 詳細情報について

  • CRID
    1363951794219651328
  • NII Article ID
    30017771869
  • DOI
    10.1088/0953-2048/17/7/016
  • ISSN
    13616668
    09532048
    http://id.crossref.org/issn/09532048
    https://id.crossref.org/issn/09532048
  • Data Source
    • Crossref
    • CiNii Articles
    • OpenAIRE

Report a problem

Back to top