Solubility product and precipitation of TaC in Fe–8Cr–2W steel

DOI Web Site Web Site 被引用文献7件

書誌事項

公開日
1998-10
権利情報
  • https://www.elsevier.com/tdm/userlicense/1.0/
DOI
  • 10.1016/s0022-3115(98)00151-2
公開者
Elsevier BV

この論文をさがす

説明

Abstract The precipitation behavior of TaC in austenite was studied to improve mechanical properties of a reduced-activation steel, Type F-82H (an 8%Cr–2%W steel). The solubility product of TaC in austenite of Type F-82H was determined as a function of temperature and was 70% larger than that of γ-Fe. On metallurgical examination, the following was found: (1) The nucleation and growth of austenite grains and/or the reverse α → γ transformation accelerated the precipitation of fine particles of TaC, and the fine precipitates suppressed the further growth of the austenite grains. (2) When homogenizing at 1523 K previously, coarse austenitic grains were observed by heating at 1223–1323 K as compared with the grains after directly heating of the hot-rolled plate, while the solubility product itself was roughly independent of the homogenizing treatment.

収録刊行物

被引用文献 (7)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ