書誌事項
- タイトル別名
-
- Performance tests of metal gaskets of Ag-bearing OFC, Zr-bearing OFC and original OFC for knife-edge-type flanges.
- ム サンソ ドウ ギン イリ ム サンソ ドウ ジルコニウム ニュウ ム サ
この論文をさがす
説明
Performance tests on the gaskets for the knife-edge-type flanges have been carried out for three different materials, namely, Ag-bearing OFC (oxygen-free copper), Zr-bearing OFC and original OFC as a reference. The tests were made by checking helium leak through the joints with the test gaskets before and after high-temperature baking and by measuring the size of the grooves made on the gaskets by joining. The results have shown that the gasket made of 0.02% Zr-bearing OFC with 10% cold work exhibits the most superior characteristic among the three materials, especially when the joints are subjected to high-temperature baking. This is probably due to the fact that the hardness change in the Zr-bearing OFC is very small in the measured temperature range between room temperature and 400°C in comparison to those of the other two materials.
収録刊行物
-
- 真空
-
真空 33 (10), 804-812, 1990
一般社団法人 日本真空学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204064654848
-
- NII論文ID
- 130000862964
-
- NII書誌ID
- AN00119871
-
- ISSN
- 18809413
- 05598516
-
- NDL書誌ID
- 3690131
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可