渦格子法によるスーパーキャビテーティング・プロペラの設計

DOI

書誌事項

タイトル別名
  • Design of Supercavitating Propellers Using a Vortex Lattice Method

抄録

This paper describes a rigorous design method for supercavitating propellers (SCPs). In a previous paper, the circulation distribution and hydrodynamic pitch were calculated by Goldstein's lifting theory. Lifting surface corrections were performed by two kinds of approximate methods. An improved correction method for camber effects was developed, using bi-parabolic polynomials. The correction for pitch including cascade effects was also made using a simple empirical formula obtained from series tests. In the present paper, the lifting surface correction was directly performed using a vortex lattice method. A more accurate circulation distribution was used, which was calculated by Lerbs' lifting line theory.<br>Three SCPs were designed, manufactured and tested in a large cavitation tunnel at the Ship Research Institute. They all generated the required thrust at the design point except the one designed for a higher load condition. The efficiencies obtained are reasonably high for all propellers. It is concluded that the present design method is one of the most promising and reliable tools for designing high performance SCPs.

収録刊行物

詳細情報 詳細情報について

  • CRID
    1390001204093796992
  • NII論文ID
    130001347758
  • DOI
    10.2534/jjasnaoe1968.1994.47
  • ISSN
    18842070
    05148499
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ