ブローオフ粉体帯電量測定装置によるトナー帯電量の測定

DOI Web Site 被引用文献2件

書誌事項

タイトル別名
  • Blow Off Powder Charge Measuring Equipment and Toner Charge Measurement by Using It
  • ブローオフ フンタイ タイデンリョウ ソクテイ ソウチ ニヨル トナー タイデ

この論文をさがす

抄録

Equipment that can measure a triboelectric charge between powder and beads was developed, using a blow off Faraday Cage that has a unique structure. The triboelectro charge between toner particles and iron beads for electrophotographic two-component developer can be measured very quickly and automatically by using this equipment.<BR> At a blow pressure higher than 0.5 kg/cm2, the corrected charge that was obtained after deducting the tribo-charge between toner (or carrier) and Faraday Cage from the measured charge shows very small variation with blow condition, e.g. blow gas pressure, nozzle orifice, etc. Therefore, these values can be considered to be representative values to indicate the triboelectric characteristics between toner and carrier.<BR> From the analysis of toner size effects on measured charge, it was deduced that the integrated number of toner-carrier contacts through the blow off measurement decided the charge magnitude. Other factors that influence the charge magnitude, e.g. toner concentration, agitation and storage, etc, also support this consideration.<BR> Although the toner-carrier contact and separation during blow off operation seems to be a very intricate phenomenon, similar activities are occuring during the development process. So, the charge obtained by the blow off method is nearly equal to the one obtained by other methods concerned with development and is closely related to the development characteristics.<BR> Therefore, from practical point of view, this equipment is very useful to evaluate development characteristics, material selection and triboelectric charge control for electrophotographic powder developer.

収録刊行物

  • 電子写真

    電子写真 16 (2), 52-58, 1978

    一般社団法人 日本画像学会

被引用文献 (2)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ