酸性フッ化アンモニウム添加のスルファミン酸浴による鉄電着
書誌事項
- タイトル別名
-
- Electrodeposition of Iron from Sulfamate Baths Containing Ammonium Bifluoride
- Electrodeposition of Iron from Sulfamic acid Baths (Part 2)
- スルファミン酸浴による鉄電着 (第2報)
この論文をさがす
説明
The effect of ammonium bifluoride as an addition agent to the bath composed of ferrous sulfamate and sulfamic acid for iron deposition was studied.<br>Furthermore, the effects of the concentration of ferrous ion, amount of the addition agent, pH, cathodic current density, and bath temperature on current efficiency and surface state of the deposited iron were also investigated.<br>As the results, the optimum conditions found were as follows.<br>Bath composition: ferrous ion 95g/l<br>saccharin 0.1g/l<br>ammonium bifluoride 10g/l<br>pH3.0<br>Depositing conditions: bath temperature 60-70°C<br>cathodic current density 5-10Amp./dm2<br>Under the above conditions, the current efficiency was 75-85% and the deposition rate was varied with the current efficiency, but was calculated to be in the range of 40-110μ/hr. The throwing power of the bath was nearly equal to that of copper sulfate bath.<br>The deposit of up to 0.5mm thick had a non-bright rugged surface, but its structure showed uniform appearance with no cracks or pits. Therefore, the addition agent, ammonium bifluoride, had an effect of preventing cracks or pits, but no effect on improving brightness.
収録刊行物
-
- 金属表面技術
-
金属表面技術 21 (5), 253-258, 1970
一般社団法人 表面技術協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204115087360
-
- NII論文ID
- 130003993891
-
- ISSN
- 18843395
- 00260614
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可
