下地無電解ニッケル‐リン皮膜状態がワイヤーボンディング特性に与える影響

DOI Web Site 被引用文献2件 参考文献14件

書誌事項

タイトル別名
  • Influence of Electroless Ni-P Film Condition on Wire Bondability
  • 下地無電解ニッケル-リン皮膜状態がワイヤーボンディング特性に与える影響
  • シタジ ムデンカイ ニッケル リン ヒマク ジョウタイ ガ ワイヤーボンディング トクセイ ニ アタエル エイキョウ

この論文をさがす

抄録

With increasing thickness of electroless gold films (greater than 0.5 μm) as a top layer, Au/Ni film shows good wire bondability. However, we confirmed that the deposited nickel structure influences wire bondability for thinner (less than 0.5 μm) electroless gold plating after heat treatment because of the different diffusion behavior of gold on the deposited nickel used as an underlayer. In this study, two types of electroless nickel plating structure with columnar and layered structure were observed and bondability was evaluated. Auto-catalytic gold of 0.2 μm thickness on the layered nickel deposits shows good wire bondability after heat treatment because the gold was deposited uniformly. In contrast, for a columnar structure, the gold on the Ni films shows poor wire bondability after heat treatment because of local corrosion occurring at the initial stage of gold immersion and because the subsequent auto-catalytic gold is not evenly distributed.

収録刊行物

  • 表面技術

    表面技術 62 (1), 47-53, 2011

    一般社団法人 表面技術協会

被引用文献 (2)*注記

もっと見る

参考文献 (14)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ