Studies on Adhesion of MMA(TBB-O) Resin to Dentin : The Efficacy of the Primer Treatment

DOI 1 Citations
  • HARA Tetsuo
    Department of Dental Materials, Nihon University School of Dentistry at Matsudo
  • HAYAKAWA Tohru
    Department of Dental Materials, Nihon University School of Dentistry at Matsudo

Bibliographic Information

Other Title
  • MMA(TBB-O)系レジンの象牙質接着性に関する研究 : プライマーの効果について

Search this article

Abstract

In this study the efficacy of the primer on adhesion of MMA(TBB-O) resin to dentin was investigated. The primer consists of two parts. One is 6% MTYA and 70% HEMA aqueous solution, and the other is 2% glutaraldehyde aqueous solution. As an etching agents, 10% citric acid-3% FeCl3(10-3), 40% phosphoric acid, 10% citric acid, and 0.5M EDTA were used. After etching, the two parts of the primer were mixed well and applied on the etched surface. Then MMA(TBB-O) resin or p-MBA/MMA(TBB-O) resin was applied on the treated surface. The tensile bond strengths after storage in 37℃ water were measured. It revealed that the primer treatment increased the bond strength despite the kind of etching agents. Though the thickness of the resin reinforced dentin was the same as that of demineralized dentin, it was not propotional to the bond strength. Then the durabilty of the adhesion to dentin treated with primer was examined by the thermal cycling tests. After 2000 thermocycles between 5℃ and 55℃, the decrease in the bond strength was very small.

Journal

Citations (1)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top