Barium M-type Ferrite as an Electromagnetic Microwave Absorber in the GHz Range

DOI Web Site Web Site 被引用文献18件 参考文献20件

書誌事項

タイトル別名
  • Barium M-type Ferrite as an Electromagn

この論文をさがす

説明

The electromagnetic microwave absorption properties of Barium M-type ferrite, in which Fe3+ was substituted by (Ti0.5Mn0.5)3+, were investigated in the GHz frequency range. The anisotropy field (HA) of Barium M-type ferrite can be changed by varying the Ti0.5Mn0.5 content, which enables the natural resonance frequency (fr) to be controlled, in the range 48 GHz to 8 GHz. BaFe12−x(Ti0.5Mn0.5)xO19 sintered ferrites with compositions x=2.5 to 5 exhibited good microwave absorption properties, with minimum reflection losses (R.L.) less than −20 dB in 1 to 20 GHz frequency range, for matching thicknesses (dm) of 0.5 to 3.8 mm. BaFe12−x(Ti0.5Mn0.5)xO19 ferrite-resin composites with 70 mass% ferrite, exhibited wide bandwidths with R.L.<−20 dB. In particular, the composite samples with compositions x=3 and x=4 had wide bandwidths of 14.1 to ∼20 GHz and 7.4 to 12.0 GHz, for matching thicknesses of 1.6 mm and 2.7 mm, respectively. These matching thicknesses were smaller than for conventional spinel ferrites. It may be concluded that Barium M-type ferrite is a good candidate for a thin electromagnetic microwave absorber in the GHz range. This is the first study to show that it is possible to use the natural resonance of M-type ferrite for the absorption of microwave radiation.

収録刊行物

被引用文献 (18)*注記

もっと見る

参考文献 (20)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ