Recent Progress in the Study of Surface Observation Using Scanning Probe Microscopy
-
- Masuda Hiroyuki
- National Research Institute for Metals
この論文をさがす
抄録
The STM was invented by Binnig et al. in 1981 at IBM Research Center. In order to overcome the defect that the STM can be used only conductive materials, the atomic force microscope (AFM) was invented by Binnig in cooperation with the University of Stanford. Both microscopes consist of the XYZ stage of piezo actuator that deforms by applying the voltage and very sharp probe is scanned in the X-Y direction to obtain the data. The microscopes based on this principle are called scanning probe microscopes (SPM). The most notable feature of the SPM is that the SPM can be used not only in air but also in liquid. Many types of the SPM are commonly available now. In the present paper, the application of SPM on observation of water film and water cluster is mainly discussed by using recent SPM research works of the author.
収録刊行物
-
- Materials Transactions, JIM
-
Materials Transactions, JIM 40 (3), 169-181, 1999
社団法人 日本金属学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204248600064
-
- NII論文ID
- 130003422590
- 10003805665
-
- NII書誌ID
- AA10699969
-
- COI
- 1:CAS:528:DyaK1MXjsFWqurs%3D
-
- ISSN
- 2432471X
- 09161821
-
- NDL書誌ID
- 4689617
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可