Slip Morphology and Recrystallization in Copper Single Crystals Tensile-Deformed along〈011〉and〈001〉Direction

  • Okada Tatsuya
    Department of Mechanical Engineering, Faculty of Engineering, Tokushima University
  • Utani Mitsuyoshi
    Department of Mechanical Engineering, Faculty of Engineering, Tokushima University
  • Osue Atsushi
    Department of Mechanical Engineering, Faculty of Engineering, Tokushima University
  • Fujii Nobukazu
    Department of Mechanical Engineering, Faculty of Engineering, Tokushima University
  • Tagami Minoru
    Department of Mechanical Engineering, Faculty of Engineering, Tokushima University
  • Inoko Fukuji
    Department of Mechanical Engineering, Faculty of Engineering, Tokushima University

書誌事項

タイトル別名
  • Slip Morphology and Recrystallization in Copper Single Crystals Tensile-Deformed along ⟨011⟩ and ⟨001⟩ Direction
  • Slip Morphology and Recrystallization in Copper Single Crystals Tensile Deformed along 011 and 001 Direction
  • Slip Morphology and Recrystallization in Copper Single Crystals Tensile-Deformed along ⟨011⟩ and ⟨001⟩ Direction

この論文をさがす

説明

Single crystals of pure copper were tensile-deformed along ⟨011⟩- and ⟨001⟩ direction and then annealed to study their deformation and recrystallization behaviors. In the ⟨011⟩ single crystals, no large-scale deformation band was formed. The areas where the secondary slip was activated were small and were randomly distributed throughout the deformed crystals. Large rotation with respect to the initial orientation was found. After annealing, many recrystallized grains were formed. In the ⟨001⟩ single crystal, because of almost equal activation of eight slip systems on four slip planes, orientation change associated with deformation was very small. Large-scale cross-slip was completely suppressed. As a result, the work-hardening of the ⟨001⟩ single crystal was very large. After annealing, large primary recrystallized grains were formed. The above results are compared with those of aluminum single crystals having the same tensile orientations.

収録刊行物

被引用文献 (4)*注記

もっと見る

参考文献 (29)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ