Characteristic Structural Changes in Stress-Induced Martensitic Transformation and Reverse Transformation of a Polycrystalline Fe-Mn-Si Alloy

DOI Web Site Web Site 被引用文献2件 参考文献34件
  • Suzuki Shigeru
    Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
  • Senoo Shotaro
    Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
  • Maruyama Tadakatsu
    Awaji Materia Co. Ltd
  • Shinoda Kozo
    Institute of Multidisciplinary Research for Advanced Materials, Tohoku University

この論文をさがす

説明

Debye rings obtained by synchrotron X-ray diffraction were analyzed for investigating structural changes caused by stress-induced martensitic transformation and reverse transformation of a polycrystalline austenitic Fe-Mn-Si shape memory alloy. The chemical composition of the shape memory alloy was Fe-28 mass%Mn-6 mass%Si-5 mass%Cr. The results showed that a part of the austenitic γ phase was transformed to a martensitic ε phase by room-temperature tensile deformation, and the ε phase was reversely transformed by subsequent heating. Diffraction intensities in Debye rings changed non-uniformly on tensile deformation and heating, indicating that occurrences of the stress-induced and reverse transformation depend on the crystallographic orientations of grains with respect to the tensile direction. The optimum recovery strain induced by the reverse transformation was obtained for a sample deformed by about 10% tensile strain, which was consistent with the structural changes caused by the reverse transformation. X-ray diffraction lines were shown to be broadened by tensile strain. This indicated that irreversible deformation due to dislocations restricted the reverse transformation, leading to the optimum recovery strain.

収録刊行物

  • MATERIALS TRANSACTIONS

    MATERIALS TRANSACTIONS 49 (12), 2755-2760, 2008

    公益社団法人 日本金属学会

被引用文献 (2)*注記

もっと見る

参考文献 (34)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ