Flow injection technique for determination of thallium, lead and bismuth in nickel-base alloys by inductively coupled plasma mass spectrometry.

DOI PDF Web Site Web Site 被引用文献4件 参考文献10件
  • MOCHIZUKI Tadashi
    Analysis Research Department, Advanced Technology Research Center, NKK Corporation
  • SAKASHITA Akiko
    Analysis Research Department, Advanced Technology Research Center, NKK Corporation
  • IWATA Hideo
    Analysis Research Department, Advanced Technology Research Center, NKK Corporation
  • ISHIBASHI Yoichi
    Analysis Research Department, Advanced Technology Research Center, NKK Corporation
  • GUNJI Naoki
    Analysis Research Department, Advanced Technology Research Center, NKK Corporation

この論文をさがす

説明

A flow injection (FI) technique has been applied to the trace analysis of metal samples using inductively coupled plasma mass spectrometry (ICP-MS). Parameters such as carrier flow rate, injection volume and sample concentration has a great influence on the sensitivity, precision and analysis time of the FI/ICP-MS. A small volume (240μl) of nickel-base alloy solutions containing up to 0.75% (m/v) was introduced into an ICP-MS instrument by the flow of carrier solution. The optimized procedure was applied to the determination of Tl, Pb and Bi in standard nickel-base alloys of the National Institute of Standards and Technology. The result was compared with that of the continuous sample nebulization method. The FI method gave improved precision as well as high sensitivity. The precision ranged from 2.0 to 8.2 (RSD, %) for the elements containing 0.25-11.7ppm. Detection limits were 0.001-0.04ppm.

収録刊行物

  • Analytical Sciences

    Analytical Sciences 6 (2), 191-194, 1990

    社団法人 日本分析化学会

被引用文献 (4)*注記

もっと見る

参考文献 (10)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ