Sulfate-selective Electrode Based on a Complex of Copper

MAZLOUM ARDAKANI M., AKRAMI Z., MANSOURNIA M., ZARE Hamid R.

doi:10.2116/analsci.22.673

Sulfate-selective Electrode Based on a Complex of Copper

DOI PDF Web Site Web Site Web Site 参考文献64件

MAZLOUM ARDAKANI M.

Chemistry Department, Yazd University
AKRAMI Z.

Chemistry Department, Yazd University
MANSOURNIA M.

Chemistry Department, Kashan University
ZARE Hamid R.

Chemistry Department, Yazd University

この論文をさがす

抄録

A new sulfate-selective electrode based on the complex N,N′-bis(2-amino-1-oxo-phenelenyl)phenylenediamine copper(II) (CuL) as the membrane carrier was developed. The electrode exhibited a good Nernstian slope of -29.5 ± 0.5 mV/decade and a linear range of 1.0 × 10^-7 - 1.0 × 10^-1 M for sulfate. The limit of detection was 1.0 × 10^-8 M. It has a fast response time of 10 s and can be used for more than three months. The selective coefficients were determined by the fixed interference method (FIM). The electrode could be used in the pH range 3.5 - 8.0. It was employed as an indicator electrode for direct determination of sulfate in pharmacy and cement samples.