-
- 周 学恩
- Department of Mechanical Engineering, Gifu University
-
- 岡村 政明
- Department of Mechanical Engineering, Gifu University
-
- メラティ アリ・アクバル
- Department of Mechanical Engineering, Gifu University
書誌事項
- タイトル別名
-
- Effect of Pin Density and Faller Spacing on Sliver Irregularity in Gill-box
- ギルキ ニ オケル ハリ ミツド オヨビ フォーラ カンカク ガ スライバムラ ニ オヨボス エイキョウ
この論文をさがす
抄録
In this research, we discussed about the effect of pin density and faller spacing on the irregularity of the sliver. Fallers with various pin densities were used and withdrawing test of a wool sliver was carried out for various faller spacing. The obtained results from the experiments such as withdrawal force, weight of the out-of-turn withdrawn fibers and its standard deviation were investigated from the standpoint of contact area between the faller pins and fibers as well as the bundle packing density in the pin zone. When the pin density of fallers increases, the contact area between the faller pins and fibers almost linearly increases but, the bundle packing density in the pin zone increases at range of 8 to 16 pin/in of fallers and then decreases at 20 pin/in of fallers. As the contact area between the faller pins and fibers increases, the withdrawal force increases and the weight of the out-of-turn withdrawn fibers as well as its standard deviation decrease. From this result, we concluded that the irregularity of the sliver decreases when the contact area and bundle density increases. And we also concluded that the contact area and bundle density are two effective parameters for investigating the role of faller in gill-box.
収録刊行物
-
- 繊維機械学会誌
-
繊維機械学会誌 57 (5), T55-T60, 2004
一般社団法人 日本繊維機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204265671168
-
- NII論文ID
- 130004470547
- 10012348743
-
- NII書誌ID
- AN00285892
-
- ISSN
- 18801994
- 03710580
-
- NDL書誌ID
- 6961118
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可