Reducing the Required Power for the Screw Type Threshing Mechanism. (Part 1). The Development and the Test of the Load Detectors at the Threshing Cylinder.

DOI Web Site 1 Citations 5 References
  • TAKAHASHI Hiroyuki
    The Japanese Society of Agricultural Machinery Bio-oriented Technology Research Advancement Institution
  • ICHIKAWA Tomohiko
    The Japanese Society of Agricultural Machinery Bio-oriented Technology Research Advancement Institution
  • SUGIYAMA Takao
    The Japanese Society of Agricultural Machinery Bio-oriented Technology Research Advancement Institution

Bibliographic Information

Other Title
  • スクリュ形脱穀機構の脱穀作用について　（第１報）　　脱穀部負荷計測装置の開発
  • スクリュケイ ダッコク キコウ ノ ダッコク サヨウ ニ ツイテ ダイ1ポウ ダッコクブ フカ ケイソク ソウチ ノ カイハツ
  • the Development and the Test of the Load Detectors at the Threshing Cylinder
  • 脱穀部負荷計測装置の開発

Search this article

Abstract

A combine harvester which has an axial flow type thresher with a screw requires more power than a tangential flow type one because the crops are managed for longer second in the threshing part. A tendency to equip a higher powered engine with this type of combine harvesters has been seen lately. However on the other hand it is necessary to reduce the required power by means of reexamination in the specification of the threshing cylinder, while maintaining the threshing performance. The object of this study is to find out the specification where the required power will be less consumed. The first part of this study describes to develop the detector in order to measure the forces on the some parts of the thresher, to inspect its function and to understand the distinctive features of the loads in the threshing parts of the combine harvester.

Journal

Citations (1)*help

See more

References(5)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top