Improvement of machinability of carbon steel by in-situ laser heat treatment

DOI IR Web Site 9 References

Bibliographic Information

Other Title
  • 機上レーザ熱処理法による炭素鋼の被削性の改善
  • 機上レーザ熱処理法による炭素鋼の被削性の改善--切りくず折断性と仕上げ面粗さへの効果
  • キジョウ レーザ ネツショリホウ ニ ヨル タンソコウ ノ ヒサクセイ ノ カイゼン キリクズ セツダンセイ ト シアゲメン アラサ エ ノ コウカ
  • —切りくず折断性と仕上げ面粗さへの効果—
  • —Effects of chip breakability and surface roughness—

Search this article

Abstract

This study examined the effects of laser heat treatment of work material on chip breakablity and surface roughness in turning of carbon steel. A direct diode laser (DDL) was installed on the tool post of a CNC lathe, and the laser was used to linearly irradiate the cylindrical workpiece surface in the longitudinal direction prior to the turning test. P30 grade carbide and TiC-Al2O3 ceramic tools were chosen and a breaker piece was used in each insert. In the case of ordinary turning without laser heat treatment, the chip was broken at a high feed rate and low cutting speed. Laser heat treatment, however, made it possible to break chips over a wide range of cutting conditions because the work material was partially embrittled. The surface roughness was somewhat reduced due to the removal of adhesive objects on the cutting edge by intermittent cutting of selective hard-brittle materials.

Journal

References(9)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top