Simultaneous determination of nitrogen and oxygen in metals by the use of ions with excess kinetic energy using a quadrupole mass spectrometer

Bibliographic Information

Other Title
  • 四重極型質量分析計を用いた過剰運動エネルギーイオンのマススペクトルを利用する金属中窒素,酸素の同時分析
  • 4ジュウキョクガタ シツリョウ ブンセキケイ オ モチイタ カジョウ ウンドウ

Search this article

Abstract

In the conventional methods for mass analysis of a mixture of nitrogen and carbon monoxide, it is usually required to solve simultaneous equations owing to the effect of multiplication of N+ and CO2+ ions at m/e=14, otherwise, a high mass resolution mass analyser to be used. In the present study, simultaneous measurement of nitrogen and carbon monoxide extracted from metals was developed with a combination of a vacuum fusion furnace and a conventional low resolution (mm= 56 at m/e= 28) quadrupole mass analyser without any modifications in the ionization chamber such as an additional repeller electrode. The behavior of mass spectra of nitrogen and carbon monoxide was investigated under various ion accelerating voltages. Only ions which have excess kinetic energy were detected at 0 V of ion accelerating voltage, hence an interference of CO2+ for N+ at m/e=14 was eliminated when carbon monoxide less than 3.6×10-2 ml (STP) was introduced. The relationships between peak intensities of N+, C+, and O+ and the concentration of nitrogen and carbon monoxide were linear over the range of 0.1×10-2 to 3.0×10-2 (STP). By measuring gas extraction curves with programmed temperature {(1020) °C/min}, N+, C+ and O+ ion peaks showed characteristic behavior which gave informations on the states of nitrogen and oxygen in the samples, respectively. The gas extraction curves of metallic chromium and one of the constituents, chromium nitride (Cr2N), were demonstrated.

Journal

  • BUNSEKI KAGAKU

    BUNSEKI KAGAKU 27 (11), 701-706, 1978

    The Japan Society for Analytical Chemistry

Details 詳細情報について

Report a problem

Back to top