モリブデン酸形陰イオン交換樹脂を用いるリン酸イオンの比色定量

書誌事項

タイトル別名
  • モリブデン酸形陰イオン交換樹脂を用いるりん酸イオンの比色定量
  • Colorimetric determination of phosphate ion using anion exchange resin of molybdate form
  • モリブデンサンケイ インイオン コウカン ジュシ オ モチイル リンサン イオ

この論文をさがす

抄録

Orthophosphate in water is effectively condensed on anion exchange resin of molybdate form, and phosphomolybdate is formed on the resin. The resin is treated by reducing agent to develop a blue color. This color intensity is proportional to the concentration of the phosphate originally present in the water. The anion exchange resin of molybdate form is prepared by immersing Dowex 1 X8 {chloride form, (100200) mesh} in ammonium molybdate solution, and drying under reduced pressure. Procedure; Add 0.5 g of the resin into 25 ml of water sample (neutral or 0.2 M hydrochloric acid concentration), and stir for 20 min. Discard the supernatant solution and add 10 ml of reducing agent solution (ascorbic acid; 0.3%, antimonyl potassium tartrate; 0.01%, sulfuric acid; 0.25 M) to the resin, and stir for 10 min at 25°C. Discard the solution and wash the resin with water. Transfer the colored resin slurry into a 1 mm cell with water, and measure the absorbance at 705 nm against the resin as a reference. When 25 ml of the phosphate solution is treated by 0.5g of the resin, (0.11.0) ppm of phosphorus can be determined. When 1000 ml of the solution is treated, several ppb of phosphorus is detectable. Constant absorbance is obtained from the phosphate solution of pH 29 and (0.11)M hydrochloric acid concentration. 1000 ppm of chloride, nitrate, sulfate and acetate do not affect the determination of phosphate in neutral or acidic solution. Silicate produces blue color as like phosphate in neutral solution, but it produces only slight blue color in 0.2 M hydrochloric acid solution.

収録刊行物

  • 分析化学

    分析化学 28 (1), 43-47, 1979

    公益社団法人 日本分析化学会

被引用文献 (4)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ