-
- TAKEUCHI Jun
- NTT Microsystem Integration Laboratories, NTT Corporation
-
- HIRATA Akihiko
- NTT Microsystem Integration Laboratories, NTT Corporation
-
- TAKAHASHI Hiroyuki
- NTT Microsystem Integration Laboratories, NTT Corporation
-
- KUKUTSU Naoya
- NTT Microsystem Integration Laboratories, NTT Corporation
説明
A compact 120-GHz-band finline orthomode transducer (OMT) with high isolation between orthogonal ports (Iop) was designed and fabricated for bidirectional wireless data transmission with polarization multiplexing. To achieve high Iop, finline OMTs normally use a resistive card to decrease unwanted resonance, that occurs on the finline, but adding a resistive card complicates the fabrication process and raises the cost of fabrication. Our proposed finline OMT uses an improved finline design in which the resonance frequency is controlled in order to expel unwanted resonance from the operation bandwidth of the 120-GHz-band wireless link. The proposed finline design enables high Iop without using a resistive card, which simplifies the fabrication process and lowers the cost of fabrication. A square horn antenna, which is attached to the finline OMT, is also designed to suppress unwanted polarization rotation of reflected waves, which further improves Iop. The proposed finline OMT has a transmission loss of less than 1.2dB, return loss of more than 12dB, cross polarization discrimination of more than 30dB, and Iop of more than 50dB across the entire occupied bandwidth of the 120-GHz-band wireless link. These characteristics are sufficient not only for 10-Gbit/s bidirectional data transmission but also for 20-Gbit/s unidirectional 2-ch data transmission by polarization-multiplexing.
収録刊行物
-
- IEICE Transactions on Electronics
-
IEICE Transactions on Electronics E97.C (2), 111-119, 2014
一般社団法人 電子情報通信学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204379456640
-
- NII論文ID
- 130003394691
-
- ISSN
- 17451353
- 09168524
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可