書誌事項
- タイトル別名
-
- Numerical Simulation of Hydrothermal Autoclave for Single Crystal Growth Process
- スイネツ ゴウセイホウ ニ ヨル バルク タンケッショウ イクセイジ ノ オートクレーブ ノ ネツ カイセキ
この論文をさがす
抄録
Numerical simulation about the hydrothermal process of two inches bulk single crystal growth has been done. The autoclave is assumed to be axisymmetric. In the present research, the authors discuss the natural convection heat transfer when the shape of baffles is flat or funnel-shaped. When the funnel-shaped baffle is used, the amount of flowing between a raw material zone and a crystal growth zone increases significantly. However, temperature difference between the two zones does not become very small. Therefore the funnel-shaped baffle is effective in hydrothermal crystal growth process from the viewpoint of transport phenomena. It is found that the best angle of the baffle is about 20 degrees in our calculation. Similar results are provided when the porous model in the raw material zone is employed.
収録刊行物
-
- 日本伝熱学会論文集
-
日本伝熱学会論文集 15 (4), 189-196, 2007
社団法人 日本伝熱学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204415672192
-
- NII論文ID
- 10019725124
-
- NII書誌ID
- AA11358679
-
- ISSN
- 18822592
- 09189963
-
- NDL書誌ID
- 8963789
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可