Effects of Tube Length and Boundary Condition on the Bubble Generation Method Using Acoustic Pressure Wave in Gas Phase
-
- KASAI Yuma
- 静岡大学大学院総合科学技術研究科 工学専攻
-
- KUSUNO Hiroaki
- 静岡大学大学院工学研究科 機械工学専攻
-
- SANADA Toshiyuki
- 静岡大学学術院工学専攻
Bibliographic Information
- Other Title
-
- 気体圧力変動を用いた気泡発生制御法における導管長さ及び境界条件の影響
- キタイ アツリョク ヘンドウ オ モチイタ キホウ ハッセイ セイギョホウ ニ オケル ドウカン ナガサ オヨビ キョウカイ ジョウケン ノ エイキョウ
Search this article
Abstract
A bubble generation method that uses a slit elastic tube and an acoustic pressure wave in the gas phase can produce single bubbles of various sizes. In the method, the bubble size greatly depends on the tube length and the boundary condition of the tube end. In this study, we investigated the effects of acoustic pressure waveforms on the bubble generation. We changed the tube length and the boundary condition of the tube end and measured the waveform using the electret condenser microphone (ECM) and the generated bubble diameter. The time length that the positive pressure was maintained on the waveform depends on the tube length and the boundary condition. The diameter of the generated bubble also changed with the time length. We demonstrated that this phenomenon was caused by the change of the phase of reflected wave at the tube end by using FDTD simulation.
Journal
-
- JAPANESE JOURNAL OF MULTIPHASE FLOW
-
JAPANESE JOURNAL OF MULTIPHASE FLOW 29 (5), 509-514, 2016
THE JAPANESE SOCIETY FOR MULTIPHASE FLOW
- Tweet
Details 詳細情報について
-
- CRID
- 1390001204437026176
-
- NII Article ID
- 130005145068
-
- NII Book ID
- AN10088286
-
- ISSN
- 18815790
- 09142843
-
- NDL BIB ID
- 027221339
-
- Text Lang
- en
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed