2.25Cr‐1Mo鋼の水素助長割れ下限界応力拡大係数とき裂先端の塑性変形に関する研究

書誌事項

タイトル別名
  • Investigation of Threshold Stress Intensity Factor and Plastic Deformation of Crack Tip for Hydrogen-Assisted Cracking of 2.25Cr-1Mo Steel.
  • 2.25Cr 1Mo コウ ノ スイソ ジョチョウ ワレ カゲンカイ オウリョ

この論文をさがす

抄録

For hydrogen-assisted cracking of 2.25 Cr-1 Mo steel, the evaluation of the threshold stress intensity factor for subcritical crack growth was examined by employing the slow strain rate test. Also, by the method of recrystallization, a high strain region formed at the crack tip was observed, and the effect of hydrogen on plastic deformation was studied. By this experiment, it was shown that hydrogen promoted subcritical crack growth at a low stress intensity level, KIH(40∼80 MPa·m1/2)well below KIc(300∼400 MP·m1/2, and hydrogen also enhanced plastic deformation at the crack tip. This result suggests that the plastic deformation which is enhanced by hydrogen exerts large effects on subcritical crack growth in hydrogen-assisted cracking of 2.25 Cr-1 Mo steel.

収録刊行物

被引用文献 (2)*注記

もっと見る

参考文献 (14)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ