アルミニウム合金ダイカストの機械的性質および破壊靭性に及ぼす鋳造組織の影響

DOI Web Site Web Site 被引用文献2件 参考文献16件

書誌事項

タイトル別名
  • Effect of Microstructure on Mechanical Properties and Fracture Toughness of Aluminum Alloy Die Castings.
  • アルミニウム ゴウキン ダイカスト ノ キカイテキ セイシツ オヨビ ハカイジ

この論文をさがす

説明

The effect of microstructure, especially DAS II (Secondary Dendrite Arm Spacing) and chill layer in ADC10 aluminum alloy die castings on the tensile properties, the fracture toughness and the crack propergation is examined by preparing the die castings which have different DAS II and different thickness of chill layer cast under several casting conditions by cold chamber die casting machine. The results are as follows. (1) The tensile strength increases with the decrease in DAS II and there is the Hall-Petch relation between DAS II and 0.2% proof stress. While DAS II doesn't affect the fracture strain. (2) As a crack propagates through the boundary between α-phase and eutectic Si crystal, the increase in DAS II makes the fracture surface be rougher and it causes the increase in the fracture toughness. (3) The tensile strength and the surface hardness of chill layer are higher than substrate. It is possible for the reason to be not only relaxation of stress concentration due to small DAS II but also strengthening by solid solution due to the larger amount of occluded copper and magnesium.

収録刊行物

被引用文献 (2)*注記

もっと見る

参考文献 (16)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ