書誌事項
- タイトル別名
-
- Embedding of a Discrete Element to the Inner Wall of PDMS Microchannel
- PDMS マイクロ リュウロ ナイヘキ エ ノ ディスクリート ソシ ウメ コミ
この論文をさがす
抄録
This paper reports a novel approach to modify a microfluidic chip by hybrid molding of small pieces to the inner wall of PDMS microchannel exposing the surface of the pieces. In this research, we employed a LSI chip and a microfabricated chip as an embedded piece. Addition of intermediate material between a piece to be embedded and a mold prevent a functional surface of the piece from possible coverage with PDMS. Agarose gel showed the best performance as such intermediate material. The use of the optimal amount of agarose successfully embedded a bare LSI chip as a functional piece into the inner wall of PDMS microchannel without wraparound or moat. This research enables us to fabricate microfluidic chips of complicated hybrid structure with various sensors as chip at low cost.
収録刊行物
-
- 電気学会論文誌E(センサ・マイクロマシン部門誌)
-
電気学会論文誌E(センサ・マイクロマシン部門誌) 136 (8), 330-336, 2016
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204460093312
-
- NII論文ID
- 130005254426
-
- NII書誌ID
- AN1052634X
-
- ISSN
- 13475525
- 13418939
-
- NDL書誌ID
- 027600157
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可