PPO/PSポリマーアロイの<i>p-v-T</i>特性と状態式
書誌事項
- タイトル別名
-
- A Study on <i>p-v-T</i> Properties and Equation of State of the Polymer Alloys Polyphenylene Oxide (PPO)/Polystyrene (PS)
抄録
A p-v-T device for determining the specific volume of solid and liquid polymer alloys as a function of pressure (up to 200MPa) and temperature (30-350°C) has been constructed. It is a plunger type which consists of a plunger, cylinder, heater and laser displacement meter. The measurement accuracy of the device was within ±2-3%. The p-v-T properties were determined by the isothermal testing method. We have discussed the effects of the mixing ratio on p-v-T properties of polymer alloys and the empirical equation of state. The empirical equation of state for amorphous polymers such as PPO, PS and its alloys is presented as follows:<br>v(p, T)=vo(0, To)+(3∑i=0AiTi+p1∑i=0BiTi+p21∑i=0CiTi)<br>Here, v is specific volumes as a function of pressure and temperature, vo is specific volume at atomospheric pressure (p=0) and room temperature (To). The Ai (i=0-3), Bi and Ci (i=0-1) are coefficients of the p-v-T characteristic each polymers. The values of these coefficients were determined by a least-squares fitting method. The specific volumes of solid and liquid amorphous polymers determined by the em. pirical eq. agree with the measured values to within 1.07% to 1.80% except for PPO. The volume strain Kv of the solid and molten polymer alloys changed irregularly depending on the mixing ratio. It is minimum when the mixing ratio is PPO/PS=20/80 weight percent.
収録刊行物
-
- 成形加工
-
成形加工 6 (4), 278-285, 1994
一般社団法人 プラスチック成形加工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001204461201536
-
- NII論文ID
- 130003691457
-
- ISSN
- 18837417
- 09154027
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可