書誌事項
- タイトル別名
-
- Printed Thermoelectric Devices using Vanadate Glass Composite Materials
- バナジウムケイ ガラス オ モチイタ トフガタ ネツデンヘンカン ソシ
この論文をさがす
説明
Thermoelectric (TE) devices have emerged as one of the most promising new technologies for use as sensor module energy harvesters and as waste-heat recovery systems. Low-cost and large-area printed TE devices are suitable because heat sources are widely distributed through-out the environment. In addition, high reliability is also required of the TE materials because the devices are operated in high-temperature environments over long periods of time. In this study, we developed glass matrix TE composite materials that have a higher softening temperature than organic materials. Using low melting point vanadate glasses as the matrix materials, we fabricated n-type Bi2Te3— vanadate glass and p-type Bi0.3Sb1.7Te3—vanadate glass composites. The figure of merit (ZT) of both materials was approximately 0.2 at temperatures between 25 and 300°C. We also fabricated a pair of thermocouple devices using these vanadate glass composites with simple printing process, and an output voltage of 5 mV was obtained when the thermocouple pair was placed on a hot plate heated to 90°C.
収録刊行物
-
- 電気学会論文誌E(センサ・マイクロマシン部門誌)
-
電気学会論文誌E(センサ・マイクロマシン部門誌) 133 (7), 280-284, 2013
一般社団法人 電気学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001204461624192
-
- NII論文ID
- 10031182717
-
- NII書誌ID
- AN1052634X
-
- ISSN
- 13475525
- 13418939
-
- NDL書誌ID
- 024777979
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可