一方向カーボン/ナイロン積層板のモードI層間破壊特性

書誌事項

タイトル別名
  • Mode I interlaminar fracture mechanics of unidirectionally reinforced carbon/nylon laminates.
  • 1ホウコウ カーボン ナイロン セキソウバン ノ モード I ソウカン ハカイ

この論文をさがす

抄録

Mode I interlaminar fracture toughness of CFRP is evaluated using DCB (Double Cantilever Beam) specimens. Unidirectionally reinforced carbon/nylon laminates were used for the test. The fracture toughness value, Gc, was obtained by the area method, compliance method and nonlinear analysis. The Gc of 2 mm-thick specimen is 10-12 times larger than that of an epoxy specimen. However, in case of an 8 mm-thick specimen, voids and fiber-bridging are observed, and the fracture mechanism is complicated. Acoustic emission (AE) was also measured during the compliance test. It is shown that the viscoelastic and plastic effects should be considered in studing the fracture mechanism.

収録刊行物

被引用文献 (1)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ