書誌事項
- タイトル別名
-
- Three-dimensional Finite Element Analysis on Tightening and Loosening Mechanism of Bolted Joint
- ボルト テイケツタイ ノ シメツケ オヨビ ユルミ キコウ ノ 3ジゲン ユウゲン ヨウソホウ カイセキ
この論文をさがす
説明
Bolted joints are widely used in mechanical structures since the disassembly for maintenance is easy without much cost. However, vibration induced loosing due to dynamic loading has been unsolved subject over past six decades. In this paper, we have investigated the mechanisms of bolted-joint tightening process and loosening process due to shear loading in the framework of the three-dimensional finite element method (FEM). Results are compared with the previous theory based on the material mechanics and experimental results. We found some new aspects for bolted-joint theory. Previous theory overestimates the tightening torque in the relation between axial forces and tightening torque. Since the previous theory ignores the extrusion of bolt from nut and the stiffness of jointed material, the load distribution of 1st pitch decreases and that of 4th pitch turns to be minimum. Good qualitative agreement is observed between FEM and experiments with respect to behavior of loosening process subjected to shear loading, such as hysteresis loop of transverse displacement and transverse load and critical slipping distance for gross slip at the head contact surface. It is found that loosening has started when complete thread contact slip has occurred prior to the gross slip at the head contact, which has been considered as an initiation point of loosening. Therefore, the modification of the design of bolted joint is needed.
収録刊行物
-
- 日本機械学会論文集Ａ編
-
日本機械学会論文集Ａ編 71 (702), 204-212, 2005
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204477503232
-
- NII論文ID
- 110004998930
-
- NII書誌ID
- AN0018742X
-
- ISSN
- 18848338
- 03875008
- http://id.crossref.org/issn/03875008
-
- NDL書誌ID
- 7266238
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可