書誌事項
- タイトル別名
-
- Stress intensity factor equations for a semi-elliptical surface crack in a shaft under bending.
- ハン ダエンジョウ ヒョウメン キレツ オ ユウスル マルボウ ノ マゲニ オ
この論文をさがす
抄録
A simple procedure for the determination of stress intensity factor K for the problems whose solutions cannot be obtained easily by numerical analysis is proposed. The method is based on the concept that if we choose two referential two-dimensional problems and two geometrically similar three-dimensional problems, the ratio of K in the three-dimensional problem is approximately equal to that in the two-dimensional problem. The accuracy of the solutions depends on the choice of referential problems. The applicability of this method is checked by applying it to a semi-elliptical surface crack in a finite-thickness plate and an edge crack in a plate with finite width. Finally, the stress intensity factors for a semi-elliptical surface crack in a round bar under bending are obtained by the proposed method, in which a plate with an edge crack under tension and bending and a shaft containing a semi-elliptical surface crack are chosen as referential problems.
収録刊行物
-
- 日本機械学会論文集A編
-
日本機械学会論文集A編 53 (495), 2062-2065, 1987
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001204478208128
-
- NII論文ID
- 110002377450
-
- NII書誌ID
- AN0018742X
-
- ISSN
- 18848338
- 03875008
-
- NDL書誌ID
- 3150788
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可