オーステナイト系ステンレス鋼SUS316の疲労挙動に及ぼす予ひずみの影響

書誌事項

タイトル別名
  • Effects of Prestrain on Fatigue Behaviour in Type 316 Stainless Steel
  • オーステナイトケイ ステンレスコウ SUS316 ノ ヒロウ キョドウ ニ オヨボス ヨヒズミ ノ エイキョウ

この論文をさがす

抄録

The fatigue behaviour of prestrained type 316 austenitic stainless steel has been studied. Two types of fatigue tests, conventional S-N tests in laboratory air and in 3%NaCl solution and stress-incremental tests, were performed. Tensile prestrains evaluated are 5%, 15%, 25% and 58%. In laboratory air, fatigue strength increased with increasing prestrain, which was attributed to both work hardening and strain-induced martensitic transformation. In 3%NaCl solution, the fatigue strengths for all specimens decreased compared with those in laboratory air and fatigue strength increased with increasing prestrain up to 15%, but above that prestrain, it decreased significantly. Corrosion pit generation and growth in transformed martensite phase were believed to be primarily responsible for the observed behaviour. Based on stress-incremental test results, the coaxing effect became less pronounced with increasing prestrain, disappeared at 15% and then again appeared at the larger prestrains of 25% and 58%. The observed prestrain dependence in corrosion fatigue behaviour and coaxing effect clearly indicated that different mechanisms had operated below and above the prestrain of approximately 15%. Possible mechanisms such as work hardening and strain-induced martensitic transformation were discussed.

収録刊行物

被引用文献 (7)*注記

もっと見る

参考文献 (11)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ