Bibliographic Information
- Other Title
-
- ドリルパイプ機の腐食疲労特性に及ぼす硫黄含有量の影響 1 圧延方向採取回転曲げ疲労試験による考察
- ドリル パイプザイ ノ フショク ヒロウ トクセイ ニ オヨボス イオウ ガン
Search this article
Abstract
The drilling pipe suffers from rotating bending stress, accompanied by axial stresss and torsional stress, It has been reported that the initiation of a crack is sulphide nonmetallic inclusions which also have a relation to the crack propagation rate. Fatigue tests have been performed in air, dripping corrosive liquids with pH 7 and pH 13 under a rotating bending load at the cyclic frequency of 300 rpm. The materials used in these tests were four kinds of normalized and tempered (NT) steels and four kinds of quenched and tempered (QT) ones whose sulphur content changed from 0.001 to 0.050 %. Corrosion fatigue strength was evaluated on corrosive liquids and sulphur content and fractographic observation has been also discussed. It was confirmed that the fatigue strength at pH 7 is not dependent on sulphur content, though the number of pits and cracks increase according to the sulphur content. In addition, the number of pits would be dependent not only on the amount of MnS
Journal
-
- TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
-
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A 55 (516), 1709-1715, 1989
The Japan Society of Mechanical Engineers
- Tweet
Details 詳細情報について
-
- CRID
- 1390001204479593344
-
- NII Article ID
- 110002377798
-
- NII Book ID
- AN0018742X
-
- ISSN
- 18848338
- 03875008
-
- NDL BIB ID
- 3247627
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed