高濃度固気二相流のための熱伝達を用いた質量流量計

DOI Web Site

書誌事項

タイトル別名
  • Mass Flowmeter Using Heat Transfer for Dense Phase Solid Gas Two Phase Flow

抄録

The authors developed a proto-type of a mass flowmeter using heat transfer for dense flow.<br>It is very important for measuring and control of distributing feedstock into plural tuyeres of direct iron reduction process, coal gasifier, direct coal liquifer etc. as a new process.<br>The authors developed a noninstrusive differential temperature sensing method for the mass flow rate 0-1, 000kg/h, mass flow ratio 0-47.2kg/kg using heat transfer cylinder 0.5m length of transport pipe 0.0175mφ by elertric heater 202.5W. The relation between the mass flow, the heat transfer coefficient and the time constant of the meter are analyzed and measured.<br>For 100μm aluminium oxide powder, over all heat transfer coefficient is maximum 286 W/m 2K, the thermal efficiency from heater to the differential temperature is maximually 121% and the time constant of the meter is 1.5min for 1, 000kg/h.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ