書誌事項
- タイトル別名
-
- Effect of Welding Conditions on Electric Resistance Seam Welding of Surface-Finished Steel Sheet.
- ヒョウメン ショリ コウハン ノ デンキ テイコウ シーム ヨウセツセイ ニ オヨボス ヨウセツ ジョウケン ノ エイキョウ
この論文をさがす
説明
The purpose of this report is to elucidate influence of welding conditions on seam weldability of a surface-finished steel sheet. The analytical equation for temperature rising in welding was obtained by means of Joule's heating law for the proposal welding model. Then, the relation between the weldability and the welding condition was considered.<BR>The experimental results are as follows.<BR>(1) Weldability becomes poor with an increase in welding speed. (2) Weldability improves with increasing current frequency. (3) Weldability improves with an increase in applied force.<BR>From the analytical equation, temperature at the end of the current path (exit point of electrode) changes periodically with current frequency and these deviations increase with increasing speed, decreasing current frequency and decreasing current path. It is considered that “Splash” is easy to cause, as much as the wider temperature deviation, and then weldability becomes poor. These analytical results may support the experimental results qualitatively.
収録刊行物
-
- 化学工学論文集
-
化学工学論文集 26 (1), 11-17, 2000
公益社団法人 化学工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204510240256
-
- NII論文ID
- 10006947841
-
- NII書誌ID
- AN00037234
-
- ISSN
- 13499203
- 0386216X
-
- NDL書誌ID
- 4959649
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可