ニューマチック・コンベヤーにおける粒子流量の制御
書誌事項
- タイトル別名
-
- The control of solid flow rate in a pneumatic conveyer.
この論文をさがす
説明
The control characteristics of the solid flow rate are investigated for a pilot scale pneumatic conveyer. The experimental system is a pressure-type vertical conveyer consisting of a 20mm-I. D. and 5.6m long transport line. Under a constant air flow rate, the solid flow rate was controlled by manipulating a vibrating feeder based on the feedback of the output signal from the hand-made impact flow-meter which was set downstream of the gas-solid separator. The control system was implimented on a personal computer. Since the output signal from the impact flow-meter contained significant amounts of random noise, a Kalman filter was applied as an observer. The controller was designed based on the discrete I-PD control formula. The formula is a kind of partial model matching method developed by Kitamori. Satisfactory control performance was achieved both as a regulator and as a servo-mechanism for the pilot plant.
収録刊行物
-
- 粉体工学会誌
-
粉体工学会誌 22 (1), 3-10, 1985
一般社団法人 粉体工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001204512208000
-
- NII論文ID
- 130003951743
-
- ISSN
- 18837239
- 03866157
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
- OpenAIRE
-
- 抄録ライセンスフラグ
- 使用不可
