書誌事項
- タイトル別名
-
- A new apparatus for particle size measurement by the method of centrifugal sedimentation.
- アタラシイ エンシン チンコウシキ リュウド ブンプ ソクテイ ソウチ ト ソ
この論文をさがす
説明
For the purpose of measuring particle size distributions, we have developed a new apparatus consisting of an imbalance measuring unit with a rotor and a personal computer.<br>The imbalance of the rotor caused by the centrifugal sedimentation of the particles in the cell installed in it was detected with the mechanism of the balancing machine and gave the particle size distribution with the aid of the computer.<br>Some test measurements were carried out with this apparatus under the following condition. The rotation of the rotor was increased linearly before a set time Tc, After Tc it was set at a constant revolution during the operation.<br>This was done in order to shorten the settling time of the particles and to extend the measuring size range.<br>The result obtained with the changing rotation gave similar distributions to those with a constant rotation using the same method previously reported by the authors.<br>Finally, a comparison with other measurements showed that the results were in good agreement with the sedimentation balance and were finer than the electric resistance and the photo extinction method.
収録刊行物
-
- 粉体工学会誌
-
粉体工学会誌 21 (12), 768-773, 1984
一般社団法人 粉体工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001204512552192
-
- NII論文ID
- 130003776972
- 40004189505
-
- NII書誌ID
- AN00222757
-
- ISSN
- 18837239
- 03866157
-
- NDL書誌ID
- 3007280
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDLサーチ
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可