溶剤蒸発後のセラミックグリーンシートの内部応力

  • 永田 公一
    京セラ株式会社 大阪生産技術センター 現 京セラ株式会社 部品研究開発本部
  • 高瀬 裕行
    京セラ株式会社 大阪生産技術センター

書誌事項

タイトル別名
  • Inner Stress of Ceramic Green Sheet after Solvent Vaporization
  • ヨウザイ ジョウハツゴ ノ セラミック グリーン シート ノ ナイブ オウリョク

この論文をさがす

抄録

Inner stress of alumina green sheet was evaluated by using green sheets composed of alumina particles with surface areas of 2.0, 6.0 and 13.4m2/g. Suspensions were prepared by mixing alumina, solvent, plasticizer and acrylic polymer. Inner stress was calculated by measuring the camber of green sheet formed on PET film after drying. The camber was first observed at the last stage of the constant rate drying period. As the weight loss increased, the camber increased during the decreasing rate drying period. As the surface area of alumina increased, inner stress of green sheet increased at the same solid content of suspension. It was found that the inner stress is affected by the storage modules (G′), tan σ and the free polymers in the suspension.

収録刊行物

  • 粉体工学会誌

    粉体工学会誌 44 (7), 501-506, 2007

    一般社団法人 粉体工学会

被引用文献 (3)*注記

もっと見る

参考文献 (20)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ