Templated Synthesis of Silica Hollow Particles by Using Spray Pyrolysis
-
- Chung Yun Seup
- Department of Chemical and Biomolecular Engineering, KAIST
-
- Lim Jung Sun
- Department of Chemical and Biomolecular Engineering, KAIST
-
- Park Seung Bin
- Department of Chemical and Biomolecular Engineering, KAIST
-
- Okuyama Kikuo
- Department of Chemical Engineering, Graduate School of Engineering, Hiroshima University
この論文をさがす
抄録
It is commonly accepted that one hollow particle is formed from one droplet in conventional spray pyrolysis or drying. Therefore, the particles size distribution is closely related to the droplet size distribution. In this report, however, a new aerosol process was proposed, in which multiple hollow particles were produced from one liquid droplet with the aid of salt and polystyrene (PS) bead. In this process, the particles size and size distribution were determined by the PS beads, not by the droplets. Silica hollow particles of 160 nm in diameter and 10 nm in shell thickness were prepared after washing off the salt with water. Geometric mean dispersion of hollow particles were 1.02, whereas the geometric mean deviation of droplets was 1.3. The role of salt was to keep nano-size hollow particles desegregated while the PS template beads were burnt off at 500°C.
収録刊行物
-
- JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
-
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN 37 (9), 1099-1104, 2004
公益社団法人 化学工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204568790016
-
- NII論文ID
- 10013576759
-
- NII書誌ID
- AA00709658
-
- ISSN
- 18811299
- 00219592
-
- NDL書誌ID
- 7091307
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可