Heavy Metal Sulfuration with Sulfur and Sodium Hydroxide for Fly Ash Immobilization

この論文をさがす

抄録

Immobilization of heavy metals contained in fly ash was conducted by mixing fly ash with asphalt, sulfur and sodium hydroxide in a bi-axial kneader heated at 403 K.<BR>From XRD analysis of the products after treatment of a mixture of CuCl, CuCl2·2H2O, CuO, CdCl2·2.5H2O, HgCl2 and HgO with sulfur and sodium hydroxide, it was confirmed that all heavy metal compounds were sulfurated to form metal sulfides at 403 K. On the other hand, zinc compounds (ZnCl2 and ZnO) were not converted to zinc sulfide, but were converted into water insoluble compounds. In this treatment, chromium(IV) oxide (CrO3) was reduced to chromium(III) oxide (Cr2O3).<BR>The amount of sulfur and sodium hydroxide necessary for complete immobilization of the heavy metals was estimated by the total metal content in fly ash, on the assumption that all heavy metals reacted with sulfur and sodium hydroxide in accordance with the following relations:<BR><BR>2MCl2 + 3S + 6NaOH → 2MS + Na2SO3 + 4NaCl + 3H2O<BR><BR>2MO + 3S + 2NaOH → 2MS + Na2SO3 + H2O</B>

収録刊行物

参考文献 (11)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ