書誌事項
- タイトル別名
-
- Effect of Applied Load and Entrainment Speed on Stress Distribution of Coated Film with Interlayer and Lubrication Characteristics under Elastohydrodynamic Lubrication Condition
- ダンセイ リュウタイ ジュンカツ カ ニ オケル チュウカンソウ オ ユウスル コーティングマク ノ オウリョク ブンプ ト ジュンカツ トクセイ ニ オヨボス フカ カジュウ ト ヒキコミ ソクド ノ エイキョウ
この論文をさがす
説明
<p> Machine components such as bearings, gears and so on are required to operate under severe tribological conditions such as elastohydrodynamic lubrication (EHL). There have been recent advances in techniques to improve sliding performance using coated films possessing superior tribological properties to reduce machine component failures. These techniques are often used under severe conditions such as elastohydrodynamic lubrication. In this paper, for coated film with interlayer and substrate used under various applied normal loads and entrainment speeds, distributions of oil film pressure, oil film thickness and stress distributions therein were numerically investigated in detail for a point contact under elastohydrodynamic lubrication condition. Also, the effects of applied normal loads and entrainment speeds on distributions of oil film pressure and oil film thickness and stress distributions were discussed. The typical results showed that oil film pressure p and maximum stress σmises-max of material including coated film and interlayer are larger, and that minimum oil film thickness hmin is smaller with increase of oil applied normal load. Maximum oil film pressure pmax, hmin and σmises-max are larger with increase of lubricant entrainment speed.</p>
収録刊行物
-
- マリンエンジニアリング
-
マリンエンジニアリング 50 (5), 678-685, 2015
公益社団法人 日本マリンエンジニアリング学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204571619712
-
- NII論文ID
- 130005179796
-
- NII書誌ID
- AA11505252
-
- ISSN
- 18843778
- 13461427
-
- NDL書誌ID
- 026728073
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可