書誌事項
- タイトル別名
-
- Magnetic Properties and Machinability of Non-oriented Electrical Steel Sheets with Good Punchability and Machinability
- カコウセイ ニ スグレタ ムホウコウセイ デンジ コウハン ノ ジキ トクセイ ト ヒサクセイ
この論文をさがす
抄録
Influence of S (Sulfur) content on the iron loss deterioration by punching operation and the machinability of non-oriented electrical steel sheets was investigated. The iron loss deterioration of the higher S steels (0.020-0.025 mass% S) by punching fine pieces is less than that of the lower one (0.005 mass% S), as a result of inhibiting plastic strain effectively near punching edge in the higher's ones. Moreover, cutting tool wear and cutting burr of the higher S steel is less than that of the lower's one. It is concluded that non-oriented electrical steels containing higher S show good performance for applying to small size motors, which can be required to be higher energy efficiency and higher productivity.
収録刊行物
-
- 電気学会論文誌. A
-
電気学会論文誌. A 119 (6), 802-807, 1999
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204598783872
-
- NII論文ID
- 130006838606
- 10004540196
-
- NII書誌ID
- AN10136312
-
- ISSN
- 13475533
- 03854205
-
- NDL書誌ID
- 4738738
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可