Inspection of Surface Rolled Sintered Gears using Eddy-Current Sensor

DOI Web Site Web Site 14 References

Bibliographic Information

Other Title
  • 渦電流形センサを用いた転造加工を施した焼結歯車の良否判定
  • ウズデンリュウケイ センサ オ モチイタ テンゾウカコウ オ ホドコシタ ショウケツ ハグルマ ノ リョウヒ ハンテイ

Search this article

Abstract

A inspection regarding surface rolled sintered gears performed in-line is required. The authors have proposed a inspection method using an eddy-current sensor. Since this method uses the eddy-current, a inspection of gears is possible in a nondestructive manner with a short time. In this paper, in order to perform a inspection using an eddy-current sensor, porosity, residual stress, resistivity, and relative permeability of the surface rolled sintered steel are measured. Furthermore, output voltage characteristics of surface rolled sintered gears that the amounts of surface rolling differ are measured. As a result, it is clarified that porosity and resistivity decrease and relative permeability increase with increasing residual stress. Moreover, it is clarified that over surface rolled gear can be judged with output voltage.

Journal

References(14)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top