細線爆破トリガ方式による真空ギャップスイッチ

DOI Web Site Web Site

書誌事項

タイトル別名
  • Vacuum Gap Switch Triggered by Exploding Wire
  • サイセン バクハ トリガ ホウシキ ニ ヨル シンクウ ギャップ スイッチ

この論文をさがす

説明

In this paper, a vacuum gap triggerd by exploding a wire set near the main electrodes is proposed. The process of an exploding wire was simulated by the Runge-Kutta method applied to a model circuit incorporating the temperature-dependent, nonlinear resistance of the wire. The time needed for the complete melting of the wire gave a good estimate of the delay time of the gap. The delay time was independent of the width of the gap, the applied voltage with fixed width, and the position of the wire. A delay time of less than 10 microseconds and a jitter of less than 1 microsecond were obtained. The triggering mechanism has not yet been confirmed, but it is clear that the diffusion of metal vapor can not explain the triggering characteristics of the gap.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ