Magnetic Properties of Nd-Fe-Co-Cu-Nb-B System Exchange Spring Magnets
-
- Yamamoto Hiroshi
- Meiji University
-
- Niinomi Toru
- Meiji University
-
- Koumo Satoshi
- Meiji University
-
- Hamano Masaaki
- Toda Kogyo Corp.
-
- Yamasaki Minoru
- Toda Kogyo Corp.
Bibliographic Information
- Other Title
-
- Nd-Fe-Co-Cu-Nb-B系交換スプリング磁石の磁気特性
- Nd Fe Co Cu Nb Bケイ コウカン スプリング ジシャク ノ ジキ
Search this article
Abstract
The amorphous melt-spun ribbons of Nd-Fe-Co-Cu-Nb-B system alloys were prepared by single roller rapid-quenching method. The effects of composition, wheel velocity and heat-treatment on the magnetic properties were investigated. The amorphous Nd9Fe75.5Co8Cu0.5Nb1B6 ribbon prepared at a wheel velocity of 15.0m/s were crystallized by heat-treatment, and the optimum heat-treatment condition was found to be at 700°C for 5min, then the value of (BH)max was 114.8kJ/m3. The temperature coefficients of Jγ and HCJ for the ribbons crystallized from the amorphous Nd9Fe75.5Co8Cu0.5Nb1B6 alloy were α(Jγ)=-0.064%/°C (reversible) and β(HCJ)=-0.426%/°C (irreversible), respectively. The value of (BH)max for the compression molding Nd9Fe75.5Co8Cu0.5Nb1B6 isotropic bonded magnet prepared by using the ribbons annealed at 700°C for 5 min is 78.66kJ/m3 and the density is 6.23Mg/m3
Journal
-
- IEEJ Transactions on Fundamentals and Materials
-
IEEJ Transactions on Fundamentals and Materials 118 (11), 1221-1227, 1998
The Institute of Electrical Engineers of Japan
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390001204600309888
-
- NII Article ID
- 130006839847
- 10004440998
-
- NII Book ID
- AN10136312
-
- ISSN
- 13475533
- 03854205
-
- NDL BIB ID
- 4588382
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed