電子ビーム照射による宇宙用熱制御材料高分子フイルムの帯電特性

DOI Web Site 被引用文献3件

書誌事項

タイトル別名
  • Electron-Beam-Induced Charging of Polymer Films for Space Use
  • Electron‐beam‐induced charging of polymer films for space use

この論文をさがす

説明

We investigated the electrostatic charging phenomena of polymer films used for the thermal control materials of spacecrafts by electron-beam irradiation simulating the hot plasma in space. Three kinds of polymer films, Teflon FEP (flurinated ethylene-propylene), Kapton PI (poly imide) and Mylar PET (poly ethylene telephthalate) of the thickness of 13-75μm, were tested under the irradiation conditions of the electron energy E lower than 50keV and the beam current density Jb lower than 1nA/cm2. The surface potentials Vs of the films were obtained as functions of E and Jb at the constant irradiation time.<br>The obtained experimental results are as follows.<br>(1) Vs increases with increase of Jb. When Vs∞Jbn is assumed, the n value is different during the films: n=1 for FEP film, n_??_0.5 for PI film and 0.5_??_n_??_0.8 for PET film.<br>(2) In Vs-E characteristics, Vs has the peak at some electron energy which is dependent on the material and the thickness.<br>These results were explained by an one-dimensional charging model in which one charge deposition layer is assumed to be formed in the bulk of the film and the volume resistivity and the secondary electron emission coefficient of the material are considered.

収録刊行物

被引用文献 (3)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ