Barrier Discharge Characteristics and Ozone Generation on Twin Needles-Plane Electrode Configuration in Dry Air

DOI Web Site Web Site BIBCODE 5 Citations 14 References
  • Hata Koji
    Department of Electrical Engineering and Computer Sciences, Graduate School of Engineering, Himeji Institute of Tecnology
  • Matsui Ryosuke
    Department of Electrical Engineering and Computer Sciences, Graduate School of Engineering, Himeji Institute of Tecnology
  • Ueno Hideki
    Department of Electrical Engineering and Computer Sciences, Graduate School of Engineering, Himeji Institute of Tecnology
  • Nakayama Hiroshi
    Department of Electrical Engineering and Computer Sciences, Graduate School of Engineering, Himeji Institute of Tecnology

Bibliographic Information

Other Title
  • 乾燥空気中での２針―平板電極のバリア放電とオゾン生成
  • カンソウ クウキ チュウ デ ノ 2ハリ ヘイバン デンキョク ノ バリア ホウデン ト オゾン セイセイ

Search this article

Abstract

Barrier discharge characteristics have been investigated for twin needles-plane electrode configuration in dry air. Characteristics of partial discharge depending on the distance between the tips of twin needles have been focused. In the case of d equal to 1.0mm˜2.0mm (d : distance between the tips of twin needle), the discharge inception voltage value increased compared with that of the single needle-plane electrode configuration. Moreover, for the d equal to 4.0mm, the discharge inception voltage value became almost the same value in the case of the single needle. It is considered that the differences of the discharge inception voltage value have been caused by the influence of tip of needle each other. In addition, discharge images by intensified still camera and CCD camera, power consumption, and ozone concentration were examined.

Journal

Citations (5)*help

See more

References(14)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top