書誌事項
- タイトル別名
-
- Experimental Study of Mode-Coupling Strength of AT-Cut Quartz Resonators with High Mesa Step Height
- ダンサリョウ ノ オオキナ バイ メサ スイショウ シンドウシ ノ モードカン ケツゴウリョウ
この論文をさがす
抄録
In this paper, the bi-mesa resonators, which can be fabricated with very high mesa steps, were fabricated, and their frequency-temperature (f-T) characteristics were measured as an index of the mode-coupling strength. Since the mode-coupling affects to the first-order temperature coefficient of the TS-1 mode, the f-T curve of the pure TS-1 mode rotates clockwise depending on the mode-coupling strength. The experimental results showed that the tendency of the first-order coefficients of the measured f-T data were in good agreement with the calculated mode-coupling strength in the mesa height range of 0 to 50%. These results indicate the validity of the calculated mode-coupling strength between TS-1 and TF modes. It is also showed that choosing lower mesa height is desirable because the face-shear modes caused by the X-Z' boundary tend to couple with the TS-1 mode when the mesa step is very high.
収録刊行物
-
- 電気学会論文誌Ｃ（電子・情報・システム部門誌）
-
電気学会論文誌Ｃ（電子・情報・システム部門誌） 127 (8), 1166-1170, 2007
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204605714688
-
- NII論文ID
- 10019522169
-
- NII書誌ID
- AN10065950
-
- ISSN
- 13488155
- 03854221
-
- NDL書誌ID
- 8907193
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可