Choke-Supported Tri-plate Transmission Line Filter for Loss Reduce Technique
-
- Okita Yasuyoshi
- Department of Electrical Engineering, Kure National College of Technology
-
- Kuroki Futoshi
- Department of Electrical Engineering, Kure National College of Technology
-
- Kawahara Yuki
- Development Center, Kawashima Manufacturing Co., Ltd.
この論文をさがす
抄録
The tri-plate transmission line is usually fabricated by etching copper-coated dielectric substrates to support the center conductor. However, the dielectric loss of the dielectric substrates is no longer negligible increasing operational frequencies, and this fact causes difficulty for loss reduction of filters at millimeter-wave frequencies. With this in mind, the tri-plate transmission line structure to be able to support the center conductor without the dielectric substrates was devised and a bandpass filter made by only metal strip was designed and fabricated as a trial at 30GHz.
収録刊行物
-
- 電気学会論文誌C(電子・情報・システム部門誌)
-
電気学会論文誌C(電子・情報・システム部門誌) 133 (5), 957-961, 2013
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204608711296
-
- NII論文ID
- 10031166975
-
- NII書誌ID
- AN10065950
-
- ISSN
- 13488155
- 03854221
-
- NDL書誌ID
- 024670219
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可