Fabrication of MgB2 Wire by Suspension Spinning

DOI Web Site 28 References

Bibliographic Information

Other Title
  • 懸濁紡糸法によるＭｇＢ２線材の作製
  • ケンダク ボウシホウ ニ ヨル MgB2 センザイ ノ サクセイ

Search this article

Description

Suspension spinning of commercially available MgB2 powder was examined to fabricate a long superconducting MgB2 wire. The MgB2 powders were suspended in a nonaqueous poly(vinyl alcohol) solution. The viscous spinning dope was extruded as a filament into a precipitating medium of methyl alcohol and coiled on a winding drum. The as-drawn filaments were pressed and heated in order to remove volatile compounds. The filamentary samples were then cold-pressed, enveloped by an iron sheet with a pellet of mixed powder of Mg and B or with Mg powders, vacuum-sealed in a fused quartz tube and sintered. The Jc of the sample was strongly dependent on the starting materials and sintering condition. Although the transport Jc value was low, such as 4500 A/cm2 at 4.2 K and self-fields, a Jc value of more than 200 A/cm2 was maintained by applying a field of 10 T. Doping of 5 at% nanoscale SiC resulted in an improvement in the Jc and superconductivity at 4.2 K was maintained by applying a field of 14 T.

Journal

References(28)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top