非弾性有限要素解析による円筒-円筒交差部の崩壊特性の研究

DOI Web Site 参考文献10件

書誌事項

タイトル別名
  • STUDY ON COLLAPSE CHARACTERISTICS OF CYLINDER-TO-CYLINDER INTERSECTIONS BY INELASTIC FINITE ELEMENT ANALYSIS
  • ヒダンセイ ユウゲン ヨウソ カイセキ ニ ヨル エントウ エントウ コウサブ ノ ホウカイ トクセイ ノ ケンキュウ

この論文をさがす

抄録

It is known that the collapse strength of complex three-dimensional structures cannot be evaluated accurately with elastic analysis, and more accurate results require the use of inelastic analysis. A typical example is cylinder-to-cylinder intersection. <br>In this study, the relationship of collapse loads and local primary membrane stresses of cylinder-to-cylinder intersections was examined. <br>First, elastic analysis on the cylinder-to-cylinder intersections with various combinations of diameter and thickness under internal pressure was conducted. The local primary membrane stress (PL) obtained from the analysis was normalized by the general primary membrane stress (Pm) . The ratio of PL⁄Pm is defined as Stress Intensification Factor (SIF) which was directly influenced by the geometries. <br>Secondly, limit load analysis was conducted on the same structures as elastic analysis and collapse pressure was obtained. The Collapse Strength Reduction Factor (CSRF) defined as the ratio of the run pipe collapse pressure to the cylinder-to-cylinder collapse pressure was proposed. The CSRF was also directly influenced by the geometries. <br>Comparing the results of SIF with CSRF, it is clear that the evaluation by method is overly-conservative and the proposed concept of CSRF method provides more accurate evaluation for the cylinder-to-cylinder intersections. Furthermore, these analysis results can be extended to the reinforced intersections. SIF or CSRF values on the reinforced intersection were predicted from the basic data.

収録刊行物

  • 圧力技術

    圧力技術 48 (3), 114-121, 2010

    一般社団法人 日本高圧力技術協会

参考文献 (10)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ